Foaming Stabilizer FP800
Foaming Stabilizer
Product Description
High Polymer Emulsion FP800 contains partially hydrolyzed polyacrylamide / polyacrylate (PHPA) copolymer and is used primarily as foaming stabilizer to enhance half-life in foaming based drilling fluids. It's also used as a borehole stabilizer to prevent reactive shale and clay from swelling and sloughing in water based drilling fluids.

FP800 is also added to low-solids drilling fluids to increase lubricity, fluid viscosity and to improve carrying capacity of air/foam injection fluids.
Application/Function
  • Creates a tighter, stronger foam, which improves the fluid's cuttings-carrying capacity
  • Be a cost-effective viscosifier in low-salinity fluids
  • Be used alone or in conjunction with KCL to stabilize active shales
Advantages
  • Mixes easily with minimum shear in fresh water
  • Provides effective clay and shale stabilization
  • Non-fermenting
  • Breaks down chemically with household bleach (sodium hypochlorite)
  • Flocculates non-reactive solids in reserve pit at low concentrations
  • Liquid product for easy mixing and rapid yield
  • Prevents bit balling and balling on stabilizers and bottom hole assemblies by coating and lubricating solids
Technical Data
Appearance Thick,opaque white liquid
pH 6.5-7.5
Active matter 30.0%-35.0%
Thermal stability,℃ 120
Recommended Treatment

Viscosity: Add 1-3L per 300 gal (1,135 L) of fluid for desired viscosity

Shale Stabilization: At least 1L per 300gal (1,135L) of fluid

Foam Stabilization: 1-2 L per 100gal (378L) of fluid.

Add FP800 in drilling fluids. Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.

Notes:
Make-up water used to mix FP800 liquid polymer should meet the following quality:
Total chloride less than 1500 ppm(mg/L)
Total hardness less than 150 ppm as calcium
Total chlorine less than 50ppm
Water pH between 8.5-9.5
Reduce total hardness of make-up water by adding soda ash (sodium carbonate) at 0.5 to pound per 100 gallons (0.6-1.2kg/m³) of make-up water.
FP800 liquid polymer can be chemically broken down with liquid bleach in regular household concentration (5%sodium hypochlorite).Do not use perfumed liquid bleach or solid calcium hypochlorite.
Shipping
Transportation of commodity name is not restricted by international regulatory agencies.
Safe Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Use of standard PPE is recommended for employee comfort and safety. See Material Safety Data Sheet (MSDS) prior to use.
Package and Storage
25kg bags or according to customer's requirement.
Avoid high-intensity extreme pressure and prolonged exposure to strong sunlight. Keep container closed. Keep away from heat, sparks and flames.